Stargas 898 User Manual -

: Always wear protective glasses when working on car batteries. Cover battery openings with a wet wiper during tests to stifle explosive gases. Electrical Safety

: Connect the dedicated modules, such as the smokemeter, EOBD/Ecureader, or oscilloscope, to the central unit's dedicated ports, ensuring they are firmly locked.

: Connect the power cord to a grounded mains socket. Turn the power switch on the rear panel to "On".

: Operate the analyzer only in dry, well-ventilated areas. Inhalation of carbon monoxide from vehicle exhaust is odorless and dangerous. Setup and Connection To prepare the STARGAS 898 for use: Module Connection stargas 898 user manual

: Wait for the tool to complete its automatic self-test and warm-up phase. The LCD screen will display the Stargas logo and software version. Operational Features

: Periodically set the "zero point" (autozero) using the internal optical filters and receptors. Filter Care

Before operating the equipment, adhere to these safety protocols to protect both the user and the device: Battery Safety : Always wear protective glasses when working on

: Regularly check the filter group, coalescing cartridge, and carbon filters to prevent internal contamination. Consumables

: Ensure the equipment is properly earthed (grounded) and never touch the unit with wet hands. Environment

: The unit uses standard thermal printer paper for generating physical test reports. or details on how to perform a Lambda probe test Stargas 898 User Manual - Facebook : Connect the power cord to a grounded mains socket

: Displays results as standard values, curves, or histograms on the integrated LCD screen. zapadpribor.com Maintenance and Calibration Zero Point Setting

: Measures carbon monoxide (CO), hydrocarbons (CH), and oxygen (O2) content. Lambda Testing