Connect your PC directly to the HMI’s Ethernet port (or USB if supported). Set a static IP on your PC in the same subnet as the panel (e.g., Panel: 192.168.0.1, PC: 192.168.0.10).
Open ProSave on your PC. From the “Device” menu, select your exact panel type (e.g., SIMATIC HMI TP700 Comfort ). Go to “General” → “Connection” and select the correct channel (Ethernet, USB, Serial). Enter the panel’s IP address. simatic prosave download
Introduction In the world of industrial automation, the Human-Machine Interface (HMI) is the window into your process. When an HMI panel fails, becomes corrupted, or requires mass deployment, Siemens provides a powerful, often underutilized tool: SIMATIC ProSave . Connect your PC directly to the HMI’s Ethernet
| Pillar | Requirement | |--------|--------------| | | PC with Ethernet, USB, or Serial port (depends on panel model). Siemens PG cables (e.g., USB/PPI Multi-Master) for legacy panels. | | Software | ProSave version matching or exceeding your panel’s firmware version. Available on Siemens Service Portal or via WinCC flexible/TIA Portal installation. | | Panel Mode | Panel must be in Transfer (Service) Mode . For OS downloads, it often needs to be in Safe Mode or Maintenance Mode . | Step-by-Step: Performing an OS Download (Panel Recovery) This is the most common high-stakes procedure. From the “Device” menu, select your exact panel type (e