This is a detailed guide to the exam, including a breakdown of major topics, typical question formats, and detailed example questions with answers. Note: 3B1 typically refers to the first of three papers for 3rd Class Power Engineering (Part B). It focuses heavily on boiler design, thermodynamics, metallurgy, and fuel systems . 1. Exam Overview (PanGlobal 3B1) | Aspect | Details | |--------|---------| | Questions | 150 multiple-choice | | Time | 4 hours | | Pass mark | 65% | | Key textbooks | PanGlobal 3rd Class, Part B, Volumes 1 & 2 | | Main sections | Boiler design, combustion, steam/water systems, materials, fittings | 2. Major Topic Areas (Weighted) From SOPEEC syllabus for 3B1:
C) 425°C – 550°C (above 400°C for carbon steel) Question 8 – Boiler Operation (Hydrostatic Test) After a major boiler repair, you perform a hydrostatic test. The test pressure for a power boiler per ASME Section I should be: A) 1.25 × MAWP B) 1.5 × MAWP C) 2.0 × MAWP D) MAWP + 100 psi power engineering 3b1 exam questions
A) Efficiency increases (higher mean temperature of heat addition) Question 5 – Water Treatment (Phosphate Treatment) What is the main purpose of coordinated phosphate/pH control in a high-pressure boiler? A) Prevent silica carryover B) Prevent caustic gouging and acid phosphate corrosion C) Remove dissolved oxygen D) Reduce total dissolved solids This is a detailed guide to the exam,
( Q_2 = 50 \times \frac12001450 = 41.38 \ \textm³/s ) ( P_2 = 2.5 \times \left(\frac12001450\right)^2 = 2.5 \times 0.684 = 1.71 \ \textkPa ) Question 7 – Materials (Creep) At what temperature range does creep become a design concern for carbon steel in boiler service? A) 150°C – 200°C B) 350°C – 400°C C) 425°C – 550°C D) > 600°C The test pressure for a power boiler per
Theory: For natural gas, stoichiometric O₂ ~ 0%. With 15% excess air, flue gas O₂ ≈ (excess air % / 100) × 21% × correction factor. Approx rule: ( O_2 \approx \frac%EA \times 21100 ) → ( 0.15 \times 21 = 3.15% ) O₂.