Codesys Sfc Example -
At 3:47 PM, a bearing seized on the acid bath agitator. The temperature spiked to 110°C. Acid_Temp > 95C triggered a pre-programmed fault.
The transition to Step 0 required Acid_Level < 5% . But the drain valve closed after 2 seconds because the "DIP" step's action had been deactivated. She forgot: Actions in SFC only run while their step is active. codesys sfc example
She closed her laptop. "Time to add a heartbeat monitor to the agitator motor," she said. "And maybe buy Dave a coffee." | Concept | In the Story | | :--- | :--- | | Step | Step 20: DIP | | Transition | Condition between steps (e.g., T#45s ) | | Action Qualifier | N (Normal), S (Set), SD (Set Dominant) | | Jump | Jump to Step 99 from a transition | | Parallel Branch | E-Stop logic running alongside main sequence | | Step Entry/Exit Actions | Code that runs when step activates/deactivates | | Implicit Action | Acid_Emergency attached to Step 20 | At 3:47 PM, a bearing seized on the acid bath agitator
She added a parallel to the main sequence: The transition to Step 0 required Acid_Level < 5%
The problem was chaos. Operators would skip steps, hit "EMERGENCY RESET" mid-dip, or manually open the drain while the coil was submerged. The old ladder logic was a 40-rung monster of interlocking seals that no one understood.